Dongfeng, DF
| Tractor Parameters | Model | DF-300A | |
| Drive Type | 2WD | ||
| Overall Dimensions | 3235×1485×1536 (Height to steering wheel) | ||
| Wheel Track(mm) | Front | 1100(Usually use),1200,1300,1400 | |
| Rear | 1100(Usually use),1200,1300,1400 | ||
| Wheel Base(mm) | 1705 | ||
| Ground | Under Front Axle | 420 | |
| Under Rear Axle | 378 | ||
| Rated Traction | In Paddy Fields | 4200 | |
| In Dry Fields | 6300 | ||
| Construction Mass(Kg) | 1240 | ||
| Min. Turning Radius(m) | 2.50 | ||
| Theoretical | Forward | 1.29,1.73,3.34,5.57,6.7,8.95,17.31,28.85 | |
| Reverse | 1.52,7.87 | ||
| Engine Specifications | Model | ZN390T | |
| Type | 3-cylinder,Upright inline cylinder radiator cooling,4-storke cycle,direct-injetion | ||
| Rated Power(Kw/hp) | 22.0/30.0 | ||
| Rated Fuel Consumption(g/kw/h) | ≤255 | ||
| Rated Speed(rpm) | 2500 | ||
| Bore×Stroke(mm) | 90×95 | ||
| Total Displacement(L) | 1.812 | ||
| Drive System | Clutch | Singal | |
| Gear Box | (4+1)×2,plannar 3-shaft for main transmission epicyclic gearing for auxiliary transmission | ||
| Main Drive | One Pair of Spiral Bevel gears | ||
| Differential | Bevel Gear | ||
| Differential Lock | Jaw Lock | ||
| Final Transmissions | Spur Gear,External Gearing | ||
| Travelling Mechanism | Tyre | front | 5.00-15 |
| rear | 11.2-24 | ||
| Steering Gear | Hydraulic streering | ||
| Brake | Disk type | ||
| Working Device | Hydraulic | Lifting Capacity at | 496 |
| 3-point Suspension | Category:I | ||
| P.T.O.Shaft | Rotating | 540/730 | |
| Spline size | 6-φ35 Rectangular spline | ||
| Tractor Parameters | Model | DF-300A | |
| Drive Type | 2WD | ||
| Overall Dimensions | 3235×1485×1536 (Height to steering wheel) | ||
| Wheel Track(mm) | Front | 1100(Usually use),1200,1300,1400 | |
| Rear | 1100(Usually use),1200,1300,1400 | ||
| Wheel Base(mm) | 1705 | ||
| Ground | Under Front Axle | 420 | |
| Under Rear Axle | 378 | ||
| Rated Traction | In Paddy Fields | 4200 | |
| In Dry Fields | 6300 | ||
| Construction Mass(Kg) | 1240 | ||
| Min. Turning Radius(m) | 2.50 | ||
| Theoretical | Forward | 1.29,1.73,3.34,5.57,6.7,8.95,17.31,28.85 | |
| Reverse | 1.52,7.87 | ||
| Engine Specifications | Model | ZN390T | |
| Type | 3-cylinder,Upright inline cylinder radiator cooling,4-storke cycle,direct-injetion | ||
| Rated Power(Kw/hp) | 22.0/30.0 | ||
| Rated Fuel Consumption(g/kw/h) | ≤255 | ||
| Rated Speed(rpm) | 2500 | ||
| Bore×Stroke(mm) | 90×95 | ||
| Total Displacement(L) | 1.812 | ||
| Drive System | Clutch | Singal | |
| Gear Box | (4+1)×2,plannar 3-shaft for main transmission epicyclic gearing for auxiliary transmission | ||
| Main Drive | One Pair of Spiral Bevel gears | ||
| Differential | Bevel Gear | ||
| Differential Lock | Jaw Lock | ||
| Final Transmissions | Spur Gear,External Gearing | ||
| Travelling Mechanism | Tyre | front | 5.00-15 |
| rear | 11.2-24 | ||
| Steering Gear | Hydraulic streering | ||
| Brake | Disk type | ||
| Working Device | Hydraulic | Lifting Capacity at | 496 |
| 3-point Suspension | Category:I | ||
| P.T.O.Shaft | Rotating | 540/730 | |
| Spline size | 6-φ35 Rectangular spline | ||