New Holland
| MODEL OF GEN-SET | GB10NH | GB12NH | GB15NH | |
| DIESEL ENGINE | Model | 295AD | 2100AD | 395AD |
| Type | Four-stocke,water-cooling,vertical | |||
| Nb. of cylinder | 2 | 2 | 3 | |
| Bore*Stroke(mm) | 95*115 | 85*90 | 85*90 | |
| Ttl.Displacement(L) | 1.63 | 1.532 | 2.043 | |
| Compression ratio | 16.5:1 | |||
| Air intake mode | naturally-aspriated | |||
| Rated output(KW) | 16.5 KW | 18 KW | 24.8KW | |
| Rated speed(rpm) | 1500 | |||
| Fuelconsumption(g/kw.h) | ≤267.9 | ≤267.9 | ≤267.9 | |
| Oil consumption(g/kw.h) | 2.72 | 2.72 | 2.72 | |
| Cooling method | water-cooled with radiator | |||
| Starting method | D.C.12V or 24V Electric starting | |||
| ALTERNATOR | Model | TF(D)W-10KW-4P | TF(D)W-15KW-4P | TF(D)W-15KW-4P |
| Rated power | 10KW | 12KW | 15KW | |
| Rated voltage | 220V, 380/220V, …/120/240V, 208/120V… | |||
| Rated current | 41.6A/83.3A | 50A/100A | 62.5A/125A | |
| Rated frequency | 50HZ/60Hz | |||
| Rated speed(rpm) | 1500/1800 | |||
| Power factor | 1 for single phase/0.8 lagging for 3-phase | |||
| Phase connection | single phase or three phase | |||
| Winding connection | 3 or 4 -wire connected(12-wire for 3-phase) | |||
| Excitation method | Brushless | |||
| Voltage regulation | AVR | |||
| CONTROL PANEL | V-meter,A-meter,Frequency meter , circuit breaker,transfer switch,AVR, temp. and pressure gauges, lighter,hour meter,engine protection device, key starter, etc. | |||
| G/N. WET(kg) | 580/520 | 610/550 | 750/690 | |
| PACKING SIZE(cm) | 185*96*110 | 185*96*110 | 196*85*102 | |
| MODEL OF GEN-SET | GB10NH | GB12NH | GB15NH | |
| DIESEL ENGINE | Model | 295AD | 2100AD | 395AD |
| Type | Four-stocke,water-cooling,vertical | |||
| Nb. of cylinder | 2 | 2 | 3 | |
| Bore*Stroke(mm) | 95*115 | 85*90 | 85*90 | |
| Ttl.Displacement(L) | 1.63 | 1.532 | 2.043 | |
| Compression ratio | 16.5:1 | |||
| Air intake mode | naturally-aspriated | |||
| Rated output(KW) | 16.5 KW | 18 KW | 24.8KW | |
| Rated speed(rpm) | 1500 | |||
| Fuelconsumption(g/kw.h) | ≤267.9 | ≤267.9 | ≤267.9 | |
| Oil consumption(g/kw.h) | 2.72 | 2.72 | 2.72 | |
| Cooling method | water-cooled with radiator | |||
| Starting method | D.C.12V or 24V Electric starting | |||
| ALTERNATOR | Model | TF(D)W-10KW-4P | TF(D)W-15KW-4P | TF(D)W-15KW-4P |
| Rated power | 10KW | 12KW | 15KW | |
| Rated voltage | 220V, 380/220V, …/120/240V, 208/120V… | |||
| Rated current | 41.6A/83.3A | 50A/100A | 62.5A/125A | |
| Rated frequency | 50HZ/60Hz | |||
| Rated speed(rpm) | 1500/1800 | |||
| Power factor | 1 for single phase/0.8 lagging for 3-phase | |||
| Phase connection | single phase or three phase | |||
| Winding connection | 3 or 4 -wire connected(12-wire for 3-phase) | |||
| Excitation method | Brushless | |||
| Voltage regulation | AVR | |||
| CONTROL PANEL | V-meter,A-meter,Frequency meter , circuit breaker,transfer switch,AVR, temp. and pressure gauges, lighter,hour meter,engine protection device, key starter, etc. | |||
| G/N. WET(kg) | 580/520 | 610/550 | 750/690 | |
| PACKING SIZE(cm) | 185*96*110 | 185*96*110 | 196*85*102 | |